Description
Fits V Series dovetail saddles. Perfect for use with a V Series side-by-side system. VDUP7- 7″ Long, 1.72″ wide, .625″ thick, Wt. 9 oz. Camera Mount – 1″ height, Wt. 2 oz.
VDUP-CM- V Series Universal Dovetail Camera Mount.
$80.00
Additional information
| Weight | .9 lbs |
|---|---|
| Dimensions | 7 × 5 × 2 in |
4 reviews for VDUP-CM- V Series Universal Dovetail Camera Mount.
Related products
-
VC9.25- V Series Dovetail Bar for Celestron 9.25″ SCT Telescope
$80.00 Add to cart -
VDUP7- V Series Universal Dovetail Bar. 7″ Long
$50.00 Add to cart -
VR90- V Series Dovetail Ring Set. 90mm Adjustable Rings
$110.00 Add to cart -
VC6- V Series Dovetail Bar for Celestron 6″ SCT Telescope
$70.00 Add to cart
Laurence G. Battin –
A very handy, excellently made mount. I like that there are eight different positions you can pick to mount the camera’s base plate, allowing easy balancing possibilities for different camera/lens combinations. I give it one star off because the screw that attaches the camera is just slightly too long, and bottoms out in the camera before the camera is secured to the mounting plate, allowing the camera to rotate too loosely on the plate. This can be fixed either by shortening the screw or adding a washer between the screw and the mounting plate. I tried it out on three different Nikon camera bodies and it was too long for all three, so I doubt it is a camera issue. Off to the hardware store for a couple 1/4″ washers…
John L. (verified owner) –
This is a solid mount with ADM’s signature impeccable machining and finish. It holds my Canon 6D and EF 24-105 lens like an angry gorilla. Works perfectly with my Celestron AVX mount. A+++
John Gladden (verified owner) –
I was concerned about an evaluation I read about this item that stated that the camera mounting bolt was too long and that the user had to use a washer. My copy of this adapter secures the camera tightly. The bolt however is metal mounted in a plastic finger(thumb) turning holder. On my copy of this adapter, it appears that the metal part pf the bolt was not centered in the plastic. This is poor quality control.
Mark Pogorzelski (store manager) –
John, thank you for the feedback. We take every comment seriously at ADM Accessories and strive to deliver the very best in telescope accessories. I am going to send this to the owner to review. You should hear back from us soon. – ADM Accessories.
E Greg (verified owner) –
Good short bar and well made clamp.
Mark Pogorzelski (store manager) –
Greg, thank you for the positive feedback!-ADM Accessories