Anthony, The VDUP4 dovetail fits my Lomo Astele telescope perfectly. I am amazed that you were able to channel the dovetail without having my dovetail on hand; just from pictures I sent to you. The holes were taped perfectly. I could not be happier with the outcome. Regards, Rick
Purchased several of these weights for my CGX. Beautiful craftsmanship. Perfectly finished. Flawless function. The size/weight allows far more options/adjustability for my system. And, as always, ADM was a pleasure to deal with. I have purchased many of Anthony’s products, and will be coming back for more.
I’m a big fan of ADM accessories – robust designs and excellent fit and finish. I use this Mini-MAX ALT/AZ device for aligning my Hydrogen-alpha ‘scope with a side-by -side 80mm refractor with a broadband filter for solar viewing. Every one of my telescopes has either an ADM V or D series primary mounting plate.… Read more “Review for Mini-MAX ALT/AZ Aiming Device. Female Saddle Version”
There’s a reason everyone uses ADM gear. Well, there’s a set of reasons, to start, there’s Anthony Davoli. His accessories solve problems because he’s an Astrophotographer, too. Then, there’s the fact that the things he makes are both functional, and beautiful. It’s delight to use the things he creates.
Are you kidding me! This upgrade to the recent purchase of the used AVX was just what I was looking for. Just Awesome! I added the Dual Saddle and Adapter as well. My only issue now is to get the AVX to respond like it looks. Might need to send it off for some proffesional… Read more “Review for AVX-OR – Celestron AVX Knob Upgrade Kit”
I recently purchased a Celestron CGEM mount and elected to add some much needed accessories vs. the stock knobs and mount parts…ADM is the only way to go, Finish wise, quality wise ADM is my first and only Choice!
VSAD-AVX- V Series Saddle. Fits Celestron AVX Mounts This piece should be originally installed on AVX mounts, its very well built, easy to install, and most importantly it does not bite dovetail but rather firmly holds it. I feel confident that my scope will not fall on the ground now. And no more scratches and… Read more “Review for VSAD-AVX- V Series Saddle. Fits Celestron AVX Mounts”
VC8-O- V Series Dovetail Bar for Celestron 8″ SCT Telescope. Orange Anodized Well machined and good anodize finish. hardware provided, a small card explaining where the 3 difference sizes of screws should go would have been appreciated, but I am new to Astronomy.
VPA-AZGT- V Series Dovetail Adapter for SkyWatcher AZ-GTi Mount Must have upgrade for the AZ-GTi. Eliminates the marring of your dovetail by the stock mounting system. Easy to install, fantastic quality, and securely holds your equipment.
VPA-FF- V Series to V Series Dovetail Adapter The double-clamp is well made, and holds my piggyback scope securely. The design adds flexibility to my system, allowing many options and configurations. Delivery was prompt with good communication. The price is also appropriate for the product. I have made many purchases from ADM, and will doubtless… Read more “Review for VPA-FF- V Series to V Series Dovetail Adapter”
DR100- D Series Ring Set. 100mm Adjustable Rings Fine craftsmanship, well-made. Excellent customer service, reasonable shipping, fast turnaround and well-packaged. Always a pleasure ordering from Anthony.
DSAD-SP- D Series Saddle. Fits Vixen Super Polaris Mounts PERFECT fit on my Vixen Super Polaris! Fits directly to the mounting saddle of the mount and uses the standard bolts/knobs, no additional bolts or tools required.
Dual EQ6-RPro XL Dual Series Saddle The saddle that comes standard with the Skywatcher EQ6-R-Pro leaves a lot to be desired. The saddle is painted the same color as the mount and feels cheap, and even worse, gave me a sense that my expensive telescope and camera set-up might one day come loose and end-up… Read more “Review for Dual EQ6-RPro XL Dual Series Saddle”
VHAND- V Series Dovetail Handle. Used along with an ADM dovetail bar, it provides a safe and confident way to lift my Esprit 120 on and off the mount. Being able to take the handle on and off quickly without tools is a big plus. As with everything else I’ve purchased from ADM, quality is… Read more “Review for VHAND – V Series Dovetail Handle.”
VPA-AZGT- V Series Dovetail Adapter for SkyWatcher AZ-GTi Mount. Having purchased ADM products previously, I knew the quality and compatibility would be spot on. I was not disappointed, with this item meeting all expectations – well made and precision fitting and finish.
DUAL-EQ6-RPRO-XL- DUAL Series Saddle. Fits SkyWatcher EQ6/ Orion Atlas Mounts. Well made excellent fit. The only thing I would recommend is for it to have a deeper recess so the counter balance rod could be fully retracted and I would be the machined flat for the dec clutch lever on the opposite side of the… Read more “Review for DUAL-EQ6-RPRO-XL- DUAL Series Saddle.”
I have set up nearly 1/2 dozen different types of scopes with both Vixen and Losmandy style base plates. Every part I purchased from ADM exceeded my expectations. The dovetail adapters and radius block adapters are excellent and very well thought out. I frequently mount a V series dovetail on the top of the scope… Read more “Top Quality Accessories”
Great, well made products. Quick shipping. Easy transactions. Not difficult to install or figure how to install based upon descriptions and photos on your website. I am pleased with the items and my entire experience with ADM!
As a returning customer I am happy to state that ADM Accessories has performed flawlessly. I procured the D Series Dovetail Bar in order to complete the de-forking process on my Meade LX600 10″ SCE. The product arrived on time and functioned perfectly. I will always rely on ADM for their quality products and service.
ADM makes extremely high quality parts for telescopes. They are very communicative, so you can tell them your needs and they will work with you to figure it all out. They are worth their weight in gold.
I have purchased many ADM products in the past and I’ve been extremely pleased with them all. I replaced my Porta Mount ll slow-motion cables with these knobs and I haven’t looked back. The knobs look and work great. I highly recommend them. The craftsmanship is top notch!
This is a terrific product featuring the usual machining excellence ADM is known for. As far as I can tell, it’s the best option on the market for those of us who want to incorporate the lightweight advantages of an Arca Swiss-style dovetail/saddle combo, which is perfect for mounting cameras and small guide scopes. For… Read more “Review for AS-SAD- Arca Swiss Style Saddle”
Beautiful engineering,impeccable aluminum work. Function & Form what more could you ask for. Fits perfect to secondary accessory holes on sct no drilling no fuss mount and go. (Celestron 8in. SCT. AVX MOUNT)
I purchased the whole kit, the LZR-532KIT. The kit includes the adjustable rings so once mounted on your scope you can set it up the same as you would a finder scope. I have both still. You can then use the laser as a finder without having to get down on you knees when siting… Read more “Review for 532nm Green Laser Pointer and Accessories”
Very nice! I came to the site just looking for the curved radius blocks for a C8, but stayed to buy the whole bar and all. Everything fit perfectly and looks great. Will be getting another one for a C11 soon.